• GTX-K-3A MED SAPI - XL SAPI SIZE PLATE BACKER FRONT & BACK SET

    $129.95
    With so many choices for body armor on this and other sites its hard to know which one to pick, but here are some good reasons to shop with us:

     1.  The personnel here have been building armor for over 30 years, that's starting out in 1988!

     2.  We are using American Made DuPont Kevlar, and use 100% American labor to manufacture them right here in   
          Houston, Texas!        

     3.  We make it to order and most of the time it ships within a few days of payment, so no old stock!
     
     4.  Water Proof Covers. 

     5.  5 year warranty on the GTX-K-3A from receipt of product.

    Specifications
         
    The GTX-K-3A is a 100% aramid based flexible panel that will meet your protective needs against 
    the .44 Magnum and the .357 Sig at NIJ 0101.06  test velocities. This set is designed to back up 
    your front & back rifle plates, we offer a number of sizes. 

    *  These inserts catch frags that may penetrate an in-conjunction-with rifle plate, and will also lower the
        blunt force trauma to the body.

    *  This set fits almost all plate carriers on the market, and is super durable.

    Defeats:  Level 3-A NIJ test projectiles at NIJ standard velocities, and all lessor threats.

    Weight:  1.35 Lbs/Sq. Ft.   (A standard 10 x 12 shooters cut plate backer weighs 1.14 Lbs not including cover)

    Thinness:  7.5mm or .300 of an inch. 

    9mm V-50:  1825 Ft./Sec. .44 Mag V-50: 1750 Ft./Sec.
    Kevlar XP  is a 100% aramid based flexible panel that will meet your protective needs against 
    the .44 Magnum and the .357 Sig at NIJ 0101.06  test velocities. This set is designed to back up 
    your front & back rifle plates, we offer a number of sizes. This is DuPon't best material at cutting
    trauma to the body usually up to 20% over other materials, and is extreme durable.

    Defeats:  Level 3-A NIJ test projectiles at NIJ standard velocities, and all lessor threats.

    Weight:  1.12 Lbs/Sq. Ft.   (A standard 10 x 12 shooters cut plate backer weighs 1.14 Lbs not including cover)

    Thinness:  6mm or .210 of an inch. 

    9mm V-50:  1780 Ft./Sec. .44 Mag V-50: 1750 Ft./Sec.

    The FF-3A featuring the Force Multiplier Dyneema, which is the highest performing material on the market. It's comprised of 100% UHWPE based flexible laminate that will meet your protective needs against the .44 Magnum and the .357 Sig at NIJ 0101.06  test velocities. This set is designed to back up your front & back rifle plates, and we offer a number of sizes. This is DSM's best material and holds the record for lowest weight 3-A systems on the market.

    Defeats:  Level 3-A NIJ test projectiles at NIJ standard velocities, and all lessor threats.

    Weight:  .86 Lbs/Sq. Ft.   (A standard 10 x 12 shooters cut plate backer weighs .75 Lbs not including cover)

    Thinness:  4.7mm or .187 of an inch. 

    9mm V-50:  1895 Ft./Sec. .44 Mag V-50: 1740 Ft./Sec.

    If thickness and weight while maintaining high performance is your requirement this is the material for you!







    Reviews